Article 39

Notification of Conformity Assessment Bodies

Article 39 specifies the requirements that conformity assessment bodies must meet before a member state can notify them to the European Commission for CRA purposes. It establishes the competence, independence, and impartiality criteria that notified bodies must demonstrate, and the ongoing obligations they bear once notified. For manufacturers, understanding Article 39 helps in evaluating whether a potential assessment body genuinely qualifies to conduct CRA conformity assessments.

Effective: December 2027Applies to: Member state national accreditation and notification authoritiesLast reviewed: 16 November 2026Verified against: the final text of Regulation (EU) 2024/2847
Source: Regulation (EU) 2024/2847, Article 39, official text on EUR-Lex

Requirements for Notified Body Qualification

Article 39 sets out the requirements that conformity assessment bodies must satisfy to be notified under the CRA. These requirements cover:

Legal establishment: The body must be established under the law of an EU member state and have legal personality - it must be a formal legal entity, not an informal group.

Independence: The body must be independent from the organisations it assesses. Specifically, it must not be the manufacturer, the manufacturer's supplier, customer, or economic partner in ways that could compromise objectivity. Employees of the body must not have been involved in the design, production, or marketing of products they assess.

Technical competence: The body must have the expertise, facilities, and equipment necessary to perform the conformity assessment tasks for which it seeks notification. For CRA assessments, this requires genuine cybersecurity expertise and the technical capability to evaluate security properties against the Annex I requirements.

Financial stability: The body must have sufficient financial resources to perform assessment activities professionally and to carry liability for assessments conducted.

CRA reference:Article 39(1)

Impartiality and Conflict of Interest Controls

Article 39 places strong emphasis on impartiality. Notified bodies must be structured and managed in a way that ensures their assessments are not influenced by commercial, financial, or other pressures from the organisations being assessed.

Key impartiality requirements include:

  • Assessment fees must not depend on the result of the assessment
  • Assessors must disclose potential conflicts of interest and recuse themselves where such conflicts exist
  • The body must have documented procedures for managing conflicts of interest
  • Senior personnel must not simultaneously hold positions in organisations whose products they assess

These requirements reflect the critical role that notified bodies play in the EU market surveillance system. An assessment that is compromised by commercial pressure provides false assurance to regulators and consumers and undermines the entire CE marking system.

CRA reference:Article 39(2)

Accreditation as Evidence of Qualification

Article 39 recognises accreditation by a national accreditation body under Regulation (EC) 765/2008 as the primary route to demonstrate competence and impartiality. Under EA-2/17 M:2026 and ENISA's 16 November 2026 publication CRA-Module B and H: CABs accreditation for notification (version 2.6), CRA Module B (Annex VIII Part II) uses EN ISO/IEC 17065:2012 as the base standard with linked competence requirements from EN ISO/IEC 17020:2012 for vulnerability handling inspection and EN ISO/IEC 17025:2017 for testing. CRA Module H (Annex VIII Part IV) uses EN ISO/IEC 17021-1:2015 with linked inspection and quality-system assessment competence.

Under EA TMB Resolution 2026 (25) 01, draft harmonised standards such as the prEN 40000 and draft ETSI EN 304 6xx series cannot be cited as normative accreditation criteria until formally published and referenced in the Official Journal, though a body may validate an internal assessment method derived from a draft.

Manufacturers selecting a notified body should request the body's accreditation scope document and confirm that it covers the exact CRA product category and Annex VIII module.

CRA reference:Article 39(3), Annex VIII

Ongoing Obligations of Notified Bodies

Once notified, bodies bear ongoing obligations under Article 39 and related provisions. These include:

Continuous qualification: Notified bodies must maintain the competence, impartiality, and financial stability that led to their notification. Significant changes - such as mergers, ownership changes, or loss of accreditation - must be reported to the notifying authority.

Transparency: Notified bodies must participate in coordination activities with other notified bodies and the Commission to ensure consistent application of assessment standards across the EU.

Record keeping: Bodies must maintain records of all assessments conducted, including the documentation reviewed, the testing performed, the findings made, and the certificates issued or refused. These records must be available to authorities on request.

Communication of non-compliance: Where a notified body finds non-compliance during an assessment, it must refuse to issue a certificate and inform the national authority. It may not issue a certificate conditional on the manufacturer correcting deficiencies without a reassessment.

CRA reference:Article 39(4)

Subsidiary Bodies and Subcontracting

Article 39 addresses the circumstances under which notified bodies can use subsidiary bodies or subcontract assessment activities. Subcontracting is permitted in limited circumstances where the subcontracted activity involves specialist expertise not available in-house, and where the notified body retains full responsibility for the subcontracted work.

Manufacturers should be aware that if their notified body subcontracts significant portions of the assessment, they should verify that the subcontractor meets equivalent competence standards. Subcontractors' work counts as the notified body's work for the purposes of the assessment certificate, but the notified body cannot excuse assessment failures by pointing to the subcontractor's errors.

Manufacturers should ask notified bodies to disclose any planned subcontracting at the assessment engagement stage and to confirm the qualifications of proposed subcontractors.

CRA reference:Article 39(5)

Work through Article 39 for each product in one CRA workspace.

Classify the product, build the Annex VII technical file and prepare Article 14 notifications. The disclosure portal that receives vulnerability reports stays free.

Frequently asked

How can I verify that a conformity assessment body is genuinely notified under the CRA?+

Check the NANDO database at ec.europa.eu/growth/tools-databases/nando. Search for the CRA regulation and confirm that the body appears with an active notification status. NANDO includes each body's notification number, scope, contact details, and notification date. Do not rely solely on the body's own marketing claims - verify directly in NANDO.

Can a notified body refuse to assess my product?+

Yes. Notified bodies are not obligated to accept all assessment requests. They may decline where they lack the relevant technical expertise, have a conflict of interest with the manufacturer, or where the product falls outside their notification scope. However, a blanket refusal based on commercial factors (for example, the assessment fee is too low) may be inconsistent with their obligations.

What happens if a notified body makes an error in my assessment?+

If an assessment error results in an incorrect certificate being issued, and this leads to a non-compliant product entering the market, both the manufacturer and the notified body may face regulatory consequences. Manufacturers bear primary regulatory responsibility, but notified bodies can face liability for assessment negligence. This is one reason why manufacturers should review assessment reports critically and seek clarification on any findings before accepting a certificate.

Are there CRA-specific notified bodies separate from other CE marking notified bodies?+

Notified bodies are notified for specific regulatory scopes. A body notified under the Radio Equipment Directive or accredited under the EUCC scheme must still be separately assessed and notified for the CRA. In its November 2026 gap analysis CRA-Module B and H: CABs accreditation for notification, ENISA notes that RED Module H bodies have the smallest gap to CRA Module H, while RED Module B laboratories relying on EN 18031 face high competence gaps in code analysis, isolation testing, and periodic Annex I Part II vulnerability handling audits. Always verify the specific CRA notification in NANDO.

Need a CVD policy for Article 39?

Annex I Part II(5) asks for a coordinated vulnerability disclosure policy. Download a free template.

Browse templates →