Article 35

Notification of Conformity Assessment Bodies to the European Commission

Article 35 establishes the process by which member states notify the European Commission of conformity assessment bodies authorised to perform third-party CRA assessments. Notified bodies carry out the third-party conformity assessments that Article 32 requires. Those cover Annex III Class II products, Annex III Class I products that do not fully apply a harmonised standard, a common specification or a certification scheme, and Annex IV critical products where no certification scheme is required. Understanding the notified body framework is essential for manufacturers of higher-risk products who require third-party certification rather than self-declaration.

Effective: December 2027Applies to: National accreditation and notification authorities in EU member statesLast reviewed: 26 October 2026Verified against: the final text of Regulation (EU) 2024/2847
Source: Regulation (EU) 2024/2847, Article 35, official text on EUR-Lex

What a Notified Body Is

A notified body is a conformity assessment organisation that has been assessed, authorised, and notified to the European Commission by a member state national authority. Notified bodies are the third-party organisations that can conduct conformity assessments under Module B (type examination), Module H (quality management system assessment), and other modules that require third-party involvement.

Under the CRA, a Class II product always needs a notified body or a European cybersecurity certification scheme specified under Article 27(9) (Article 32(3)). A Class I product needs a notified body unless the manufacturer fully applies a harmonised standard, a common specification or a certification scheme at assurance level at least substantial (Article 32(2)). No CRA harmonised standard is cited in the Official Journal yet, so today Class I products also go to a notified body. Critical products in Annex IV use a certification scheme required under Article 8(1), or the Class II procedures (Article 32(4)). Default-class products can use Module A internal control without a notified body (Article 32(1)).

Notified bodies are listed in NANDO (New Approach Notified and Designated Organisations), the European Commission's database of notified bodies. Manufacturers seeking third-party assessment should verify that their chosen assessment body is listed in NANDO for the relevant CRA assessment modules before engaging them.

CRA reference:Article 35(1)

The Notification Process

Member states notify conformity assessment bodies to the Commission through the NANDO notification system. Before notifying a body, the member state must ensure the body meets the requirements set out in the CRA regarding competence, impartiality, independence from manufacturers, and financial stability.

The notification must specify the types of products and assessment tasks the body is authorised to handle. A notified body's scope is defined at notification - a body notified for consumer IoT assessments may not be authorised to assess industrial control systems without a separate or expanded notification.

Once a body is notified and appears in NANDO, manufacturers across all EU member states can engage it for assessments - not only manufacturers in the member state that notified the body. This cross-border validity is important for manufacturers seeking to choose assessment bodies based on expertise and commercial terms rather than geography.

CRA reference:Article 35(2)

Requirements for Notified Body Accreditation

A notifying authority may notify only conformity assessment bodies that meet the requirements in Article 39, under Article 43(1). A body that meets the relevant harmonised standards published in the Official Journal is presumed to meet those requirements, under Article 40. The notification is made through the New Approach Notified and Designated Organisations information system, NANDO, under Article 43(2).

The notification states the conformity assessment activities, the modules and the products concerned, and the attestation of competence. Where the notification does not rest on an accreditation certificate, the notifying authority must give documentary evidence of the body's competence under Article 43(4).

Manufacturers should check the body's NANDO entry, and that its notified scope covers the module and the product, before they commission an assessment.

CRA reference:Article 39, Article 40, Article 43

Monitoring and Withdrawal of Notified Body Status

Under Article 45(1), a notifying authority that finds a notified body no longer meets the Article 39 requirements, or fails its obligations, restricts, suspends or withdraws the notification and informs the Commission and the other Member States. Under Article 46, the Commission investigates doubts about a notified body's competence and can ask the Member State to take corrective measures, including de-notification.

After a restriction, suspension or withdrawal, or when a body stops its activity, Article 45(2) requires the notifying Member State to ensure that the body's files are processed by another notified body or kept available for the authorities.

Manufacturers should check that the notified body that assessed their product is still active in NANDO, and agree in the contract where the assessment files go if the notification ends.

CRA reference:Article 45, Article 46

Practical Implications for Manufacturers of Higher-Risk Products

For manufacturers of Annex III products, the availability of appropriately notified bodies is a practical constraint on market readiness. At the time of the CRA's application, the notified body market for cybersecurity assessments is still developing. Not all EU member states have notified bodies with cybersecurity expertise across all product categories.

Manufacturers should engage potential assessment bodies early - ideally 12 to 18 months before their target product launch date - to understand assessment timelines, costs, and documentation requirements. Capacity constraints at notified bodies could delay product launches if manufacturers leave engagement too late.

Product design choices that simplify the assessment process - such as using harmonised standards, maintaining rigorous technical documentation from the start of the development cycle, and building in security testing as a standard development step - can significantly reduce assessment time and cost.

CRA reference:Article 35, Article 32

Work through Article 35 for each product in one CRA workspace.

Classify the product, build the Annex VII technical file and prepare Article 14 notifications. The disclosure portal that receives vulnerability reports stays free.

Frequently asked

Where can I find a list of CRA-notified bodies?+

Notified bodies are listed in the NANDO database at ec.europa.eu/growth/tools-databases/nando. Search for the CRA regulation to find bodies notified for CRA assessments. The database includes each body's scope, contact details, and notification status. Note that the database may not be fully populated in the early months after the CRA application date.

Can I use a non-EU conformity assessment body for CRA assessments?+

No. Only bodies notified by EU member state national authorities and listed in NANDO are recognised as notified bodies under the CRA. Non-EU bodies - for example, US or UK cybersecurity testing organisations - cannot issue CRA conformity assessments, even if they are highly reputable. Mutual recognition agreements with third countries could change this in future but are not in place as of the CRA application date.

Does a notified body certificate expire?+

Yes. Conformity assessment certificates issued under the CRA have a validity period specified in the certificate. Manufacturers must renew assessments before certificates expire, or if significant product changes have been made that affect compliance. Maintaining continuous valid certificates is necessary for the CE marking to remain valid.

What happens if I start production before a notified body has assessed my Class I product?+

For Annex III Class I and Class II products, the CE marking cannot be lawfully affixed without the required third-party involvement. Placing the CE marking without completing the required conformity assessment is a violation subject to penalties under Article 64. Manufacturers should complete the conformity assessment process before finalising the CE marking and placing products on the market.

Need a CVD policy for Article 35?

Annex I Part II(5) asks for a coordinated vulnerability disclosure policy. Download a free template.

Browse templates →