CRA Compliance

Are the EN 40000 standards for the Cyber Resilience Act published?

By CVD Portal
••Last updated 2026-11-18••6 min read

CEN and CENELEC published EN 40000-1-1:2026 (vocabulary) and EN 40000-1-2:2026 (principles, product risk management and lifecycle activities) on 18 November 2026. Neither part gives a presumption of conformity with the Cyber Resilience Act, because CEN expects no Official Journal citation for them. FprEN 40000-1-3:2026 on vulnerability handling is the only part with a citation expected.

Key takeaways

  • EN 40000-1-1:2026 and EN 40000-1-2:2026 have the CEN status Published, with a date of availability of 18 November 2026.
  • A published EN 40000-1-1 or EN 40000-1-2 gives no presumption of conformity, because the CEN records say no Official Journal citation is expected for Regulation (EU) 2024/2847.
  • FprEN 40000-1-3:2026 on vulnerability handling is under approval, and its CEN record is the only one in the series that says a citation is expected.
  • The CEN record for FprEN 40000-1-3:2026 gives no ratification or availability date yet, so the publication date of EN 40000-1-3 is not known.
  • Article 14 reporting has applied since 11 September 2026, whatever the state of the standards.

What did CEN and CENELEC publish on 18 November 2026?

CEN and CENELEC published the first two parts of the horizontal EN 40000-1 series. The two parts come from Technical Committee CEN/CLC/JTC 13, working group 9, under standardisation request M/606 for the Cyber Resilience Act.

PartReferenceTitleCEN statusCitation in OJEU
1-1EN 40000-1-1:2026VocabularyPublishedNo citation expected
1-2EN 40000-1-2:2026Principles, product risk management, and lifecycle activitiesPublishedNo citation expected
1-3FprEN 40000-1-3:2026Vulnerability handlingUnder ApprovalCitation expected
1-4prEN 40000-1-4Generic security requirementsUnder DraftingNo citation expected

The table copies the CEN project records as read on 18 November 2026. The record titles part 1-4 "Generic security requirements" with no part number in the title.

What do the CEN dates mean for EN 40000-1-1 and EN 40000-1-2?

The two published parts have the same five dates. Each date has a fixed meaning in the CEN process.

DateValueMeaning
Ratification (DOR)2 November 2026The CEN Technical Board noted the approval of the EN
Availability (DAV)18 November 2026CEN distributed the final text in the official languages
Announcement (DOA)28 February 2027Latest date for each national standards body to announce the EN
Publication (DOP)31 May 2027Latest date for an identical national standard, for example NEN-EN or DIN EN
Withdrawal (DOW)31 May 2027Latest date to withdraw national standards that conflict with the EN

A manufacturer buys the text from a national standards body, such as NEN in the Netherlands, DIN in Germany or AFNOR in France. The national version can go on sale before the latest publication date, so ask your body when its version is available.

Does a published EN 40000-1-2 give a presumption of conformity?

No. Article 27 of Regulation (EU) 2024/2847 gives a presumption of conformity only for a harmonised standard whose reference is published in the Official Journal of the European Union. The CEN records for EN 40000-1-1 and EN 40000-1-2 say no citation is expected for the CRA.

EN 40000-1-2 is still useful. It gives a method for the cybersecurity risk assessment that Article 13(2) requires, and a list of lifecycle activities to plan the work against. If you use it, record in your technical documentation that you used EN 40000-1-2:2026 as a method. Do not write that it gives a presumption of conformity. Our walkthrough of risk assessment with EN 40000-1-2 shows the method in practice.

What happens next with EN 40000-1-3 on vulnerability handling?

FprEN 40000-1-3:2026 goes through the CEN Formal Vote. The prefix FprEN marks a final draft for that vote. The CEN record shows the status Under Approval and gives no ratification, availability or publication date yet. When the record shows those dates, the dates for part 1-3 are known.

If the vote approves the text, CEN ratifies and publishes the EN. The European Commission can then assess the standard and publish its reference in the Official Journal. Only after that citation does EN 40000-1-3 give a presumption of conformity with the vulnerability handling requirements in Annex I Part II. Nobody has announced a date for the citation.

The Formal Vote draft changed the structure of part 1-3 against the 2025 Enquiry draft. It has six phases (preparation, receipt, verification, remediation, release and post-release) with 22 numbered activities. It also sets a hard limit of 7 calendar days to acknowledge a vulnerability report. Our explainer of how part 1-3 structures vulnerability handling and the EN 40000-1-3 page cover the activities.

What about EN 40000-1-4 on generic security requirements?

prEN 40000-1-4 is still a draft. The CEN record shows the status Under Drafting and no citation expected. The next CEN step for a draft is the Enquiry, and the record gives no date for it. See the EN 40000-1-4 page for its scope.

What should a manufacturer do now?

Do not wait for a citation to start. The CRA dates do not move with the standards.

ObligationApplies fromWhat to do now
Article 14 reporting of actively exploited vulnerabilities and severe incidents11 September 2026Keep a 24-hour reporting process ready today
Annex I Part I and Part II, conformity assessment, Declaration of Conformity11 December 2027Use EN 40000-1-2:2026 as the method for the risk assessment
Vulnerability handling under Annex I Part II11 December 2027Build the process against FprEN 40000-1-3:2026, then check it against the published EN in 2027

Three steps for this quarter:

  1. Buy EN 40000-1-2:2026 from your national standards body and map your risk assessment to its clauses.
  2. Check that your disclosure policy accepts reports through any channel and acknowledges each report within 7 calendar days, as FprEN 40000-1-3:2026 requires.
  3. Run the free EN 40000-1-2 readiness check to see which evidence you already have.

CVD Portal keeps the vulnerability handling records that part 1-3 asks for and stores the evidence for the technical file. The disclosure portal is free, and the Compliance tier covers the risk assessment and the Declaration of Conformity.

Sources

Photo: printed circuit boards, Wikimedia Commons, released under CC0.

Frequently asked questions

Are EN 40000-1-1 and EN 40000-1-2 published?

Yes. The CEN project records show EN 40000-1-1:2026 and EN 40000-1-2:2026 with the status Published and a date of availability of 18 November 2026. National standards bodies must publish identical national standards by 31 May 2027.

Does EN 40000-1-2 give a presumption of conformity with the Cyber Resilience Act?

No. Under Article 27 of Regulation (EU) 2024/2847, a presumption of conformity comes only from a harmonised standard whose reference is published in the Official Journal of the European Union. The CEN records for EN 40000-1-1 and EN 40000-1-2 say no citation is expected for the CRA.

Which EN 40000 part is expected to give a presumption of conformity?

Only part 1-3 on vulnerability handling. The CEN record for FprEN 40000-1-3:2026 says a citation in the Official Journal is expected for Regulation (EU) 2024/2847. The text is under approval and has no publication date yet.

When will EN 40000-1-3 be published?

CEN gives no date yet. The CEN record for FprEN 40000-1-3:2026 shows the status Under Approval and no implementation dates. A citation in the Official Journal can follow only after CEN publishes the EN.

CRA deadline briefing

A short email on the Cyber Resilience Act obligations and the run-up to full application on 11 December 2027.

We use your email only to send the briefing. Unsubscribe any time with one click.