Presumption of conformity is a legal principle in European Union product legislation under which a product that conforms to a harmonised standard cited in the Official Journal of the European Union is presumed to meet the essential legal requirements covered by that standard. Manufacturers remain free to prove compliance through alternative technical solutions when no harmonised standard is applied.
CRA Legal TermsLast updated 13 November 2026
Key takeaways
- A European standard confers presumption of conformity only after the European Commission publishes its reference in the Official Journal of the European Union under the relevant act.
- Presumption of conformity covers only the specific statutory essential requirements mapped in Annex ZA or Annex ZZ of the cited harmonised standard.
- Under Article 27 of the EU Cyber Resilience Act, presumption of conformity can arise from cited harmonised standards, Commission common specifications, or recognised European cybersecurity certification schemes.
- When the Commission cites a standard with restrictions in the Official Journal, such as EN 18031 under the Radio Equipment Directive, the restricted clauses confer no presumption of conformity.
How does presumption of conformity work in EU product law?
Under the EU New Legislative Framework and Regulation (EU) No 1025/2012, EU directives and regulations set binding essential requirements while leaving technical implementation details to European standardisation organisations (CEN, CENELEC, and ETSI). When the European Commission issues a standardisation request and subsequently publishes a standard's reference in the Official Journal of the European Union (OJEU), that standard becomes a harmonised standard.
Applying a cited harmonised standard is voluntary, yet doing so shifts the evidential burden. Market surveillance authorities must presume that the product complies with the essential requirements covered by the standard unless they demonstrate otherwise. Ratification and publication by CEN, CENELEC, or ETSI alone gives no legal presumption until the Official Journal citation appears.
| Instrument status | Official Journal citation | Legal effect for the manufacturer |
|---|---|---|
| Harmonised standard cited without restriction | Published in OJEU under the specific EU act | Confers presumption of conformity for every essential requirement mapped by the standard |
| Harmonised standard cited with restriction | Published in OJEU with excluded clauses or conditions | Confers presumption except for the restricted clauses, which require direct compliance evidence or a notified body |
| Ratified EN or draft prEN without citation | Absent from OJEU under that act | Confers zero legal presumption, though useful as engineering structure in the technical file |
| Commission common specification | Adopted by implementing act in OJEU | Confers presumption of conformity when harmonised standards do not exist or are insufficient |
| European cybersecurity certification scheme | Recognised under the EU act and Regulation (EU) 2019/881 | Confers presumption of conformity to the extent the certificate covers the essential requirements |
How does CRA Article 27 apply presumption of conformity?
Article 27 of Regulation (EU) 2024/2847 sets three routes to presumption of conformity with the essential cybersecurity requirements of Annex I. Under Article 27(1), products and manufacturer processes that conform to harmonised standards or parts thereof cited in the Official Journal are presumed to be in conformity with the Annex I requirements covered by those standards. The Commission mandated 41 horizontal and vertical standards under standardisation request M/606 (C(2025) 618 final), including the horizontal EN 40000 series and the vertical ETSI EN 304 series.
Under Article 27(2), the Commission may adopt common specifications by implementing act where harmonised standards do not exist, face undue delays, or fail to satisfy essential requirements. Under Article 27(8) and (9), a European cybersecurity certificate or statement of conformity issued under Regulation (EU) 2019/881 also confers presumption of conformity for the requirements it covers. Partial application of a cited standard confers presumption only for the applied clauses, as detailed in the Article 27 explainer.
What happens when the Commission cites a standard with restrictions? The EN 18031 example
Before publishing a reference in the Official Journal, the European Commission assesses whether the standard satisfies the underlying legal requirements. When specific clauses allow configurations that fall short of the law, the Commission can cite the standard in the Official Journal subject to formal restrictions.
Commission Implementing Decision (EU) 2025/138 of 28 January 2025 cited EN 18031-1, EN 18031-2, and EN 18031-3 (2024 editions) in the Official Journal under Radio Equipment Directive 2014/53/EU Article 3(3)(d), (e), and (f), with specific restrictions. For example, clauses allowing a user to skip setting a password, lacking parental or guardian access control on certain toys and childcare equipment, or relying solely on one update verification mechanism without combinations do not confer presumption of conformity. A radio equipment manufacturer relying on a restricted clause cannot self-certify that aspect through the standard and must involve a notified body under the Radio Equipment Directive. Furthermore, Official Journal citations are act-specific, so EN 18031 confers presumption under the Radio Equipment Directive rather than under the Cyber Resilience Act, as explained on the EN 18031 guide.
How does presumption of conformity affect notified body routes under CRA Article 32?
For default-class products under the CRA, manufacturers can self-assess under Module A internal control whether or not a cited harmonised standard exists. For important products in Annex III Class I, presumption of conformity determines whether a third-party notified body is mandatory.
Under Article 32(2), a manufacturer of an Annex III Class I product can use Module A self-assessment only when it has applied harmonised standards, common specifications, or a recognised certification scheme covering all applicable essential requirements. If no cited standard exists yet, if the manufacturer applies a standard only in part, or if a needed clause is excluded by an Official Journal restriction, the manufacturer must use a third-party conformity assessment route (Module B+C or Module H).
Work through the CRA for each product in one workspace.
Classify each product, build the Annex VII technical file and prepare Article 14 notifications. The disclosure portal that receives vulnerability reports stays free.
Frequently asked
Does a published EN standard automatically give presumption of conformity?+
No. Publication of a European standard by CEN, CENELEC, or ETSI makes the technical text available, yet it confers zero presumption of conformity on its own. Legal presumption starts only on the date the European Commission publishes the standard's reference in the Official Journal of the European Union under the specific regulation or directive, and only within any restrictions attached to that citation.
Does EN 18031 give presumption of conformity with the Cyber Resilience Act?+
No. Commission Implementing Decision (EU) 2025/138 cited EN 18031-1, EN 18031-2, and EN 18031-3 in the Official Journal under Directive 2014/53/EU (the Radio Equipment Directive), subject to published restrictions. An Official Journal citation applies only to the Union act under which it is published. Test reports from EN 18031 remain useful technical evidence inside a CRA Annex VII technical file, without creating a legal presumption under CRA Article 27.
Are harmonised standards mandatory when placing a product on the EU market?+
No. Harmonised standards remain voluntary under Regulation (EU) No 1025/2012. A manufacturer can demonstrate compliance directly against the statutory essential requirements in its technical documentation. However, for CRA Annex III Class I important products, choosing not to apply cited harmonised standards or common specifications in full removes the Module A self-assessment option under Article 32(2) and requires third-party assessment by a notified body.
This definition is part of the EU Cyber Resilience Act guide, which explains Regulation (EU) 2024/2847 article by article.
Browse the full CRA Compliance Checklist
See how Presumption of Conformity fits into your complete CRA compliance programme.